how to port recovery.img for mtk 6582 easy guide with ss

In this how to make TWRP tutorial, I will show you how to make a TWRP recovery on an already rooted phone.

What you will need

MTK mobile
A USB cable
A PC
The Easy Ultimate TWRP installer (Download links are in Stage 2)

Stage 1: Preparation

Some of these may or may not be required depending on what you have done so far. If you have:

USB debugging enabled
ADB drivers installed on PC
Have stock firmware or a flash tool backup of your phone available
Are rooted already
NVRAM backed up

Then you can skip the following steps and head to the next stage. If any of these steps have not been completed, please see the following steps.

Enable USB debugging on your MTK mobile phone
Install ADB drivers on your PC if not already installed. This step is required so that your PC can communicate with your mobile phone. I recommend PDANet drivers available and that is what’s linked to here. You do not need to install the app on your phone, so once the PDANet drivers are actually installed on PC, you can quite the installer. If you have any issue with PDANet ADB drivers,there is also a pack available here with most every currently released driver installer. If you have Windows 8 or Windows 8.1 there is a tutorial here on some tips to get ADB drivers installed correctly.
If stock firmware is not easily available for your phone, you will first want to backup your phone.Making any changes to your phone can brick it, so take this step seriously.
- If you are already rooted:Written tutorial and YouTube video how to backup MTK MediaTek MT6577, MT6572, MT6589, MT6592, MT6595, MT6732, MT6752 mobile phones
- Make a backup of your NVRAM

Stage 2: Create Magic Auto TWRP for your MTK Phone

Download, extract and run TWRP Setup.exe. There are two different versions, one is TWRP 2.7.1.0 (Download) and the other TWRP 2.8.1.0 (Download). For KitKat, I recommend 2.8.1.0. For older Jelly Bean devices, try 2.7.1.0 first.
After installing Easy Magic Auto TWRP, if you’re not ready yet, click “No”. Otherwise, go ahead and click “Yes”.
If you see “What do you wanna do?”, or are starting the program from TWRP.exe, go ahead and click “OK” to start Easy Magic Auto TWRP.
The next screen that comes up will ask you if you want Auto or manual. At this point click “Yes” to Auto create the TWRP for your MTK6592 MT6572 MTK6582 MTK6595 device.
You will then see a set of requirements for the tool. They are more or less what I went through in Stage 1 of this tutorial. Assuming you have completed all of the necessary prerequisites, go ahead and connect your powered on device to PC via USB and click “OK”
You will then see a series of dialog boxes that tell you some things about your phone that you likely already know. You may get a dialog box that asks if you have a flipped recovery screen. Unless you know your recovery is coming up upside down, you will answer “No” to this.
During the install be very aware of root permission requests on your phone’s screen. You will want to allow any requests that come up.
When the TWRP recovery has succesfully been made and pushed to your phone, you will then shut down and boot into recovery by holding the Power + VolUp (some phones are power button + VolDown) to make sure that all has completed successfully.